Zoeller 507-0005 Basement Sentry Battery Backup Pump

Zoeller 507-0005 Basement Sentry Battery Backup Pump Review

Zoeller 507-0005 Basement Sentry Battery Backup Pump Feature

• Provides extra protection when the primary AC pump fails due to power outages, when the primary pump fails
• All models have battery burn out and overcharge
• Model 507 has a self contained 10 amp battery recharger
• All systems are fully solid state automatic controllers with alarms, light indicators and have warning systems
• NOTE: Sump Pump and Battery are not included, as they must be purchased separately

Zoeller 507-0005 Basement Sentry Battery Backup Pump System When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability. When your house is dependent on a sump system in the basement it can be a huge problem id that system fails. Because of this, Zoeller Pumps have created a basement battery backup pump that can be easily installed and can help you to maintain your peace of mind that your sump system it set up to work correctly. The Zoeller 507-0005 Basement Sentry Battery Backup Pump System runs off a 10 Amp battery charger and has battery overcharge protection. The pump itself runs off a 12 volt highly efficient battery with noncorrosive pump construction, with 6 leads. It comes with the pump, control box, control device, battery case, fittings, and charger. Zoeller 507-0005 Basement Sentry Battery Backup Pump System Features: FEATURES: 10 Amp battery charger with burnout and battery overcharge protection. PUMP--12 volt highly efficient with noncorrosive pump construction. Supplied with 6' leads. CONTROL BOX--12 volt, D.C., fully solid state, automatic with complete light, alarm indicators and warning system. CONTROL DEVICE--Variable level reliable (Low Voltage) float switch. BATTERY CASE--12-1/2" (L) x 7" (W) x 7-3/4" (H). FITTINGS--Furnished with ALL required fittings. Model 507 has an internal check valve in the discharge and includes an additional heavy duty check valve adaptable to 1-1/4" or 1-1/2" pipe. Provides for high capacity capabilities in critical installations and faster charging recovery of the battery. Minimum pit size requirements: 18" diameter x 24" deep Primary sump pump must be ordered separately.

Wayne Submersible Sump Pump - 2820 GPH, 1/3 HP, 1 1/2in., Model# RSP130

Wayne Submersible Sump Pump - 2820 GPH, 1/3 HP, 1 1/2in., Model# RSP130 Review

Wayne Submersible Sump Pump - 2820 GPH, 1/3 HP, 1 1/2in., Model# RSP130 Feature

• Includes tethered switch for automatic operation
• Top suction design resists clogging as debris is filtered
• Thermoplastic construction will not rust or corrode
• 1 1/2in. threaded discharge for high-capacity and ease of hookup
• Fits 14in. wide opening

The Wayne submersible sump pump moves up to 2820 GPH. Fits 14in. wide opening. HP: 1/3, Flow (GPH): 2,820, Volts: 115, Amps: 11, Suction Type: Top, Discharge Port (in.): 1 1/2, On-Level (in.): 14, Off-Level (in.): 7, Min. Basin Needed (in.): 15, Pump Housing: Glass reinforced polyporpylene, Volute: Glass reinforced ABS, Impeller Shaft: Glass reinforced PBT, Thermal Overload Protection: Yes, Dimensions L x W x H (in.): 8 x 8 x 10

Superior Pump 92341 /3 HP Cast Iron Sump Pump Side Discharge with Vertical Float Switch

Superior Pump 92341 /3 HP Cast Iron Sump Pump Side Discharge with Vertical Float Switch Review

Superior Pump 92341 /3 HP Cast Iron Sump Pump Side Discharge with Vertical Float Switch Feature

• 1/3-horsepower
• 45-gallons per minute
• Solid cast iron construction
• For use in sump applications
• 10-foot cord

1/3HP split capacitor motor - high efficiency - low draw, 100 percent cast iron construction, 10' grounded water proof power cord, pumps up to 46 gallons per minute, 2760 gallons per hour, side and bottom intake provides for clog resistant suction, vertical float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, handles 3/8" solids, 1-1-2" female pipe discharge thread. Three year warranty from Superior Pump Co.

Wayne CDU800 1/2 HP Cast Iron Submersible Sump Pump

Wayne CDU800 1/2 HP Cast Iron Submersible Sump Pump Review

Wayne CDU800 1/2 HP Cast Iron Submersible Sump Pump Feature

• 1/2 HP submersible sump pump made of durable cast iron
• Designed for use in sump pits of at least 11 inches
• Ceramic mechanical seal for work in demanding environments
• 1-1/2-inch discharges for maximum flow
• 3-year limited warranty

The Wayne 1/2 HP cast iron submersible sump pump is designed for work in sump pits 11 inches or larger. Its ceramic mechanical seal keeps this pump going in even the most demanding environments, and the 1 1/2-inch discharges creates maximum flow and ensures easy installation. It works 9 inches on level or 4 inches off level. A two-pole switch prevents basement flooding in the event that one pole sticks, and disconnecting 115-volt conductors prevent damage from lightning. The automatic overload mechanism prevents damage to motor windings, permanently lubricated ball bearings need no oiling, and the waterproof three-prong grounding wire with an 8-foot extension reaches distant outlets. Wayne backs its pump with a three-year limited warranty.

Little Giant 505350 1/6 Horsepower 5-ASP-LL Water Wizard 5 Series Submersible Utility Pump

Little Giant 505350 1/6 Horsepower 5-ASP-LL Water Wizard 5 Series Submersible Utility Pump Review

Little Giant 505350 1/6 Horsepower 5-ASP-LL Water Wizard 5 Series Submersible Utility Pump Feature

• Bottom sump-type pick up with removable plastic screen, pumps down to 1/8-Inch
• Low-level pressure diaphragm
• Has a 1-foot FNPT discharge, optional regular garden hose adapter
• screened inlet, 18-foot power cord, 1/6 HP
• Epoxy coated cast aluminum housing, UL listed

Little Giant 5-ASP-LL

Jackel Sump Pump Basin (18"x 24") - SF22

Jackel Sump Pump Basin (18"x 24") - SF22 Review

Structural Foam Sump Basin Heavy-duty design, contractor grade construction Universal...

Superior Pump 93501 1/2-Horsepower Cast Iron Sewage Pump with Tethered Float Switch

Superior Pump 93501 1/2-Horsepower Cast Iron Sewage Pump with Tethered Float Switch Review

Superior Pump 93501 1/2-Horsepower Cast Iron Sewage Pump with Tethered Float Switch Feature

• 1/2-Horsepower
• 70-Gallon per minute
• Solid cast iron construction
• Will pass up to a 2-Inch solid
• For use in sewage/sump applications

From Superior Pump, this submersible sewage pump features a tethered float switch and a reliable 1/2-horsepower continuous-duty motor. Able to handle 2-inch solids, this large-capacity pump can lift water up to 25 feet and deliver flow rates up to 80 gallons per minute. Its cast iron body and non-clogging Vortex impeller ensure a long, low-maintenance life.

Sewage Pump At a Glance: Powerful, 1/2-horsepower continuous-duty split-capacitor motor Handles 2-inch solids and high-capacity pumping Moves up to 80 gallons per minute Can push water up to 25 feet vertically Cast aluminum, non-clogging Vortex impeller Durable, cast iron housing and base for long life

Submersible, non-clogging, large-capacity pump features durable cast iron housing.

Large Capacity Suited to Home and Commercial Applications
This dependable, submersible sewage pump is built to effectively handle a range of typical residential and commercial applications. Whether material is being moved from a basin to a drainage field or from a basin up to sewer or septic lines, the pump's large discharge design easily handles 2-inch solids and high-capacity pumping. It is powerful enough to lift water up to 25 feet vertically. When used on a level plane, it can move up to 80 gallons per minute. This sewage pump delivers a maximum force of 10.83 psi.

Continuous-Duty Motor for Reliable Performance
Behind the pump's consistent performance is a continuous-duty split-capacitor motor. This 7.6 amp, 1/2-horsepower motor operates at speeds up to 1,750 rpm and can produce 912 watts of power. It is thermally protected and rated for 180 degrees Fahrenheit (82 degrees Celsius).

Cast Iron Design with Non-Clogging Vortex Impeller
Thanks to a dependable, non-clogging Vortex impeller made of cast aluminum, as well as rugged cast iron housing and base construction, this Superior Pump unit can be trusted to withstand continuous use in tough environments. For added durability, this pump features stainless steel fasteners and a baked-on powder-coat finish. Its tethered float switch relies on a wide-angle, mechanical, pump-mounted float that's constructed of glass-reinforced nylon.

The 10-foot, water-resistant power cord makes it easy to connect the pump to a power source. This sewage pump is UL/C-UL listed and CSA certified for safety and dependability.

Warranty Information
The Superior Pump Sewage Pump is backed by a one-year warranty.

What's in the Box
Sewage pump.

1/2HP heavy duty split capacitor motor - high efficiency - low Amp draw, 100 percent cast iron construction, 10' grounded waterproof power cord, pumps up to 80 gallons per minute, 4800 gallons per hour, bottom intake provides for clog resistant suction, clog-free metal vortex impeller, tethered float switch with piggy back plug included, pump will lift water over 25 ft. vertical height, handles 2" solids, 2" female iron pipe discharge thread. One year warranty from Superior Pump Co.

Wayne Pumps Sump Pump Check Valve 57028-001

Wayne Pumps Sump Pump Check Valve 57028-001 Review

Wayne Pumps Sump Pump Check Valve 57028-001 Feature

• 57028-001 SUMP CHECK VALVE
• SUMP PUMP CHECK VALVE

Includes: Two convertible fittings and four hose clamps. Durable thermoplastic valve body and poppet designed to resist corrosion and to stop noise. Handles either 1-1/4" or 1-1/2" OD pipe.

Glentronics, Inc. BW4000 1730 Gallons Per Hour Basement Watchdog Combination Primary and Back-Up Pump System

Glentronics, Inc. BW4000 1730 Gallons Per Hour Basement Watchdog Combination Primary and Back-Up Pump System Review

Glentronics, Inc. BW4000 1730 Gallons Per Hour Basement Watchdog Combination Primary and Back-Up Pump System Feature

• Includes 1/3 HP sump pump and Watchdog Special battery back-up
• Package contains: Controller, charger, two dual micro reed float switches, primary pump and backup pump, instruction manual (battery and acid sold separately)
• Back-up starts immediately after loss of power or if flow of water is too great for the AC pump alone
• Back-up features unique monitoring systems to diagnose problems and sound an alarm
• Compact, fits in pits as small as 12-Inch in diameter.

BW4000 Features: -Pump system.-Package contains: Controller, charger, two dual micro reed float switches, primary pump and backup pump, instruction manual (battery and acid sold separately).-Material: Acrylonitrile butadiene styrene.-Offers two combination sump pump systems designed to provide both primary and battery backup pump capabilities.-Primary pump will operate as long as it is receiving AC power.-Power is interrupted, or if more water is coming into the sump than the AC pump can handle, the backup sump pump will begin pumping automatically.-Backup system has unique monitoring features that diagnose a problem and sound an alarm.-Light on the display panel of the control unit will indicate the cause of the alarm and the corrective action.-Two systems have been pre-assembled for easy installation.-Compact, fits in pits as small as 12'' in diameter.-Dual float switches for added protection.-Primary float switch has a protective cage.-Engine HP: 0.5 (Primary) and 0.33 (Backup).-Primary system pumping capacity: 4400 GPH @ 0' or 3200 GPH @ 10'.-Backup system pumping capacity: 2500 GPH @ 0' or 1730 GPH @ 10'. Color/Finish: -Color: Silver and Black. Specifications: -Power supply requirements: 115 volts AC. Dimensions: -Dimensions: 18'' H x 11'' W x 8.75'' D. Warranty: -2-Year warranty. Disclaimer: -User-friendly controller sounds an alarm, illuminates a warning light and describes what to do for easy maintenance.

Heavy-duty 1/2 Hp Dirty Water Submersible Pump with Float Switch - 1,800 Gallons-per-hour Evacuation

Heavy-duty 1/2 Hp Dirty Water Submersible Pump with Float Switch - 1,800 Gallons-per-hour Evacuation Review

Heavy-duty 1/2 Hp Dirty Water Submersible Pump with Float Switch - 1,800 Gallons-per-hour Evacuation Feature

• 1/2 HP dirty submersible water pump with float switch
• Submersible pump is designed for use for drainage for limited period of time
• Maximum pump rate: 1980 Gal/Hour
• Diamater of pipe: 1-1/4"
• Max particle size 1-3/16"

Pump is fully submersible (waterproof sealed) and can be submerged down to a depth of 15 ft. Submersible pump is designed for use for drainage, or transfer of liquid. The pump can drain water or liquid down to about 2-3 inches depth. Draining water from boats or yachts as well as for water aeration and circulation for limited period of time. Disclaimer: corrosive, easily combustible or explosive substances (e.g. gasoline, petroleum, nitro thinner), fats, oils, salt, and water water of toilets and urinals must not be used with this pump. The temperature of the liquid handled should not exceed 35 degree C.

Little Giant 505000 1/6 Horsepower 5-MSP Water Wizard 5 Series Submersible Utility Pump

Little Giant 505000 1/6 Horsepower 5-MSP Water Wizard 5 Series Submersible Utility Pump Review

Little Giant 505000 1/6 Horsepower 5-MSP Water Wizard 5 Series Submersible Utility Pump Feature

• Bottom sump-type pick up with removable plastic screen
• Pumps down to 1/8-Inch, pumps up to 18.3 GPM
• 10 foot cord, 115 volts,1/6-horsepower motor
• Includes garden hose adapter and removable inlet screen
• UL listed, cast aluminum housing

For use in Residential applications with light to medium transfer demands. Pumps up to 18.3 GPM. Pumps down to an 1/8in. from the floor. Includes garden hose adapter and removable inlet screen for easy cleaning. UL and CSA listed. 1-year limited warranty. Flow (GPH): 1,200, Volts: 115, HP: 1/6, Max. Total Head (ft.): 26.3, Max. Suction Lift (ft.): 26.3, Discharge Port (in.): 1, Pump Housing: Durable Protective Epoxy Coating for Corrosion Resistance, Volute: Nylon, Impeller Shaft: Nylon, Seals: Viton, Power Cord (ft.): 10

Superior Pump 92333 1/3 HP Thermoplastic Pedestal Sump Pump

Superior Pump 92333 1/3 HP Thermoplastic Pedestal Sump Pump Review

Superior Pump 92333 1/3 HP Thermoplastic Pedestal Sump Pump Feature

• Reliable 1/3-horsepower moter
• Pumps 40 gallons per minute
• Constructed with a thermoplastic base
• Stainless steel drive shaft with metal switch arm
• For use in sump applications

For use in sump basins 12" or larger. Thermoplastic base, fully adjustable automatic switch, steel drive shaft, metal switch arm, 10' cord, 1-1/4" discharge.

Glentronics, Inc. BWSP 1730 Gallons Per Hour Basement Watchdog Special Back-Up Sump Pump

Glentronics, Inc. BWSP 1730 Gallons Per Hour Basement Watchdog Special Back-Up Sump Pump Review

Glentronics, Inc. BWSP 1730 Gallons Per Hour Basement Watchdog Special Back-Up Sump Pump Feature

• Pumps 2,500 GPH at 0 ft. of lift and 1,730 GPH at 10 ft. of lift
• User-friendly control panel lights up with a warning and describes what to do for easy maintenance
• A sensor monitors battery fluid levels for increased piece of mind
• Includes controller, charger, dual float switch, pump and battery box (battery sold separately)
• Compact pump can be installed even in small or narrow sump pits

The Basement Watchdog battery backup pump, pumps 1730 GPH at a 10' lift. Starts pumping automatically when your main sump pump fails. Monitors battery, power, and pump conditions constantly. Sounds an alarm when problems arise or maintenance is needed. User friendly control panel pin points solutions for easy maintenance. Pumps continuously for over 7.5 hours with The Basement Watchdog 7.5 hour standby battery, model

Flotec FP0F360AC Cyclone 1/12 HP 350 GPH Pumping System

Flotec FP0F360AC Cyclone 1/12 HP 350 GPH Pumping System Review

Flotec FP0F360AC Cyclone 1/12 HP 350 GPH Pumping System Feature

• Maximum pumping capacity up to 350 gallons per hour
• For emergency basement pumping, empty water beds, and pump out furnace pits and window wells
• Kit includes 1/12 Hp, 115 volt AC, 60 Hz, 1.5 amp motor, 6' power cord with automatic thermal overload protection, 6' garden hose, and puddle gulper

Pumps 360 gallons per hour For emergency basement pumping, empty water beds, and pump out furnace pits and window wells Kit includes 1/12 Hp, 115 volt AC, 60 Hz, 1.5 amp motor, 6 power cord with automatic thermal overload protection, 6 garden hose, and puddle gulper

Zoeller M53 Mighty-mate Submersible Sump Pump, 1/3 Hp

Zoeller M53 Mighty-mate Submersible Sump Pump, 1/3 Hp Review

Zoeller M53 Mighty-mate Submersible Sump Pump, 1/3 Hp Feature

• 1/3 H.P. motor
• 1-1/2" NPT Discharge & Passes 2" spherical solids
• Non-clogging vortex impeller design
• Durable cast iron switch case, motor, and pump housing
• Automatic with float activated switch

Zoeller Pump Co. M-53 Mighty Mate clear effluent or dewatering submersible pump. Choice of many plumbers and contractors. 1/3 HP cast iron housing with plastic vortex impeller.

9ft. power cord. Truely a all star pump. Powder coated epoxy CI and SS fastners. Oil filled motor with thermal overload. CSA UL SSPMA

Glentronics, Inc. DFK-961 1/3 Horsepower Basement Watchdog Submersible Combination Sump Pump System

Glentronics, Inc. DFK-961 1/3 Horsepower Basement Watchdog Submersible Combination Sump Pump System Review

Glentronics, Inc. DFK-961 1/3 Horsepower Basement Watchdog Submersible Combination Sump Pump System Feature

• AC-powered primary pump operates as long as power is available
• Backup sump pump automatically begins pumping if the power is interrupted or if more water is coming into the sump than the primary pump can handle
• Combination sump pump system offers primary and battery backup pump capabilities
• User-friendly controller sounds an alarm, illuminates a warning light and describes what to do for easy maintenance
• Compact design fits in pits with diameters as small as 12 in.

DFK961 Features: -Pump system. -Package contains: Controller, charger, two dual micro reed float switches, primary pump and backup pump, instruction manual (battery and acid sold separately). -Color: Silver and Yellow. -Material: Acrylonitrile butadiene styrene. -Offers two combination sump pump systems designed to provide both primary and battery backup pump capabilities. -Primary pump will operate as long as it is receiving AC power. -Power is interrupted, or if more water is coming into the sump than the AC pump can handle, the backup sump pump will begin pumping automatically. -Backup system has unique monitoring features that diagnose a problem and sound an alarm. -Light on the display panel of the control unit will indicate the cause of the alarm and the corrective action. -Two systems have been pre-assembled for easy installation. -Compact, fits in pits as small as 12'' in diameter. -Primary float switch has a protective cage. -User-friendly controller sounds an alarm, illuminates a warning light and describes what to do for easy maintenance. -2-Year warranty. Specifications: -Engine HP: 0.33 (Primary) and 0.25 (Backup). -Power supply requirements: 115 Volts AC. -Primary system pumping capacity: 3600 GPH @ 0' or 2600 GPH @ 10'. -Backup system pumping capacity: 2000 GPH @ 0' or 1000 GPH @ 10'. -Dimensions: 17.75'' H x 10'' W x 8.75'' D.