Liberty Pumps 253 1/3-Horse Power 1-1/2-Inch Discharge 250-Series Cast Iron Automatic Submersible Sump/Effluent Pump

Liberty Pumps 253 1/3-Horse Power 1-1/2-Inch Discharge 250-Series Cast Iron Automatic Submersible Sump/Effluent Pump Review

Liberty Pumps 253 1/3-Horse Power 1-1/2-Inch Discharge 250-Series Cast Iron Automatic Submersible Sump/Effluent Pump Feature

• Pumps up to 50 GPM
• Maximum discharge head of 21-Foot
• 1/2-Inch solids handling
• Efficient motor design reduces electrical usage by up to 40-percent
• Wide-angle float with series (piggy-back) plug allows manual operation of pump

Liberty Pumps 253 is a 1/3HP Automatic/Manual Submersible Sump/Effluent Pump with 10ft power cord. It comes factory-equipped with a wide-angle float switch (mercury-free, mechanically activated) mounted to the pump. Turn-on level of the switch is 11" and turn-off level is 4-1/2". This pump has two cords - one to the float switch and the other to the pump motor. The switch cord has a series (piggyback) plug enabling the pump (motor) cord to be plugged into the back of it (see attached files for details). The purpose of this design is to allow temporary manual operation of the pump if desired.The Liberty Pumps 253 has 1-1/2" NPT discharge, 1/2" solids-handling, 18' shut-off head, a unique one-piece cast iron housing and thermally protected permanently lubricated motor.Use for De-watering, Sump and Effluent Applications.For added protection, consider the addition of a back-up pump such as Liberty's SJ10 SumpJet, as well as an alarm such as Liberty's ALM-2 in applications where loss of pump function could result in property damage. If an alarm is used, it must be connected to a separate electrical circuit.CAUTION Do not let the pump run dry.

Zoeller 53-0001 M53 Duplicate of B000H5PYR2

Zoeller 53-0001 M53 Duplicate of B000H5PYR2 Review

Zoeller 53-0001 M53 Duplicate of B000H5PYR2 Feature

• 1/3 H.P. motor
• 1-1/2" NPT Discharge & Passes 2" spherical solids
• Non-clogging vortex impeller design
• Durable cast iron switch case, motor, and pump housing
• Automatic with float activated switch

"ZOELLER" SUBMERSIBLE PUMP *3/10 HP *For sump/dewatering septic tank effluent *Thermal over load protected *Cast iron body with, plastic base *1-1/2" NPT discharge *115 volt *2580 GPH at 5', 2040 GPH at 10', 1140 GPH at 15' head

Red Lion SC33PED 1/3-HP 3500-GPH Pedestal Sump Pump, Cast Iron

Red Lion SC33PED 1/3-HP 3500-GPH Pedestal Sump Pump, Cast Iron Review

Red Lion SC33PED 1/3-HP 3500-GPH Pedestal Sump Pump, Cast Iron Feature

• Ideal for average water removal
• Heavy-duty cast iron construction
• Clog-resistant design
• Capable of passing 1/2-Inch diameter solids
• Extremely versatile

Little Giant SC33PED 1/3-HP 3600-GPH Pedestal Sump Pump, Cast Iron (14942051)No matter what division of Little Giant, we have always been proud in supplying you some of the latest innovations within the various industries we serve. We acheive our continued success by listening to customers and incorporating the highest quality standards to our latest ideas.This Little Giant Automatic Cast Iron Pedestal Sump Pump is ideal for average water removal. It has a clog resistant design that is capable of passing 1/2-Inch solids. Rugged cast iron construction with a steel column for years of service and reliability. It has an adjustable snap-action float switch which operates in basins 11-Inch in diameter or greater. Little Giant SC33PED 1/3-HP 3600-GPH Pedestal Sump Pump, Cast Iron (14942051) Features:; Ideal for average water removal; Heavy-duty cast iron construction; Clog-resistant design; Capable of passing 1/2-Inch diameter solids; Extremely versatile; 115V ; 60HZ ; 8FT CORD

Superior Pump 92370 Thermoplastic Sump Pump with Tethered Float Switch, 1/3 HP

Superior Pump 92370 Thermoplastic Sump Pump with Tethered Float Switch, 1/3 HP Review

Superior Pump 92370 Thermoplastic Sump Pump with Tethered Float Switch, 1/3 HP Feature

• Continuous duty, thermally protected, split capacitor motor
• Pumps will lift water up to 25' of vertical height
• Tough thermoplastic construction
• Large 1-1/2" discharge for high capacity pumping
• Can be used as a sump pump by adding an optional float switch

1/3HP split capacitor motor - high effieiency- low Amp draw, corrosion resistant plastic, 10' grounded water proof power cord, pumps up to 48 gallons per minute, 2880 gallons per hour, side and bottom intake provides for clog resistant suction, tethered float switch with piggy back plug included, cooler operating 115V motor provides continuous duty, pump will lift water over 25 ft. vertical height, handles 3/8" solids, 1-1/2" female iron pipe discharge thread. One year warranty from Superior Pump Co.

Wayne PC2 115-Volt 340 GPH Portable Transfer Water Pump, Bronze

Wayne PC2 115-Volt 340 GPH Portable Transfer Water Pump, Bronze Review

Wayne PC2 115-Volt 340 GPH Portable Transfer Water Pump, Bronze Feature

• Heavy-duty bronze plated pump housing for durability
• Portable pump for household and utility applications
• Removes water down to 1/8-inch of surface when water suction attachment is connected
• Pumps up to 310-gallons of water per hour
• Discharge threaded to accept standard garden hose

The Wayne 115V transfer pump is a portable, lightweight pump that is ideal for household use. Flow (GPH): 310, Volts: 115, Self-Priming: Yes, Volute: chrome-plated bronze volute

Glentronics, Inc. 30HDC140S Basement Watchdog Back-Up Sump Pump Battery

Glentronics, Inc. 30HDC140S Basement Watchdog Back-Up Sump Pump Battery Review

Glentronics, Inc. 30HDC140S Basement Watchdog Back-Up Sump Pump Battery Feature

• For use with a battery backup sump pump system
• Can pump intermittently for days
• Accommodates the basement watchdog fluid sensor
• Lasts up to 5 - 7 years in standby service
• Shipped dry

7.5 Hour Deep Cycle Battery, 140A, Shipped Dry, For Use With Basement Watchdog Sump Pump - Model #BWD12-120 Item #364417, Or Basement Watchdog Special Sump Pump - Model #BWS-12A Item #364425, Order Acid Separately, Item #368100.

Wayne CDU790 1/3-Horsepower Cast Iron Submersible Sump Pump

Wayne CDU790 1/3-Horsepower Cast Iron Submersible Sump Pump Review

Wayne CDU790 1/3-Horsepower Cast Iron Submersible Sump Pump Feature

• Cast iron pump housing for durability
• Mechanical float switch provides reliable operation and allows installation in sump basins 11" in diameter or larger
• Top suction strainer filters debris and protects pump from clogging
• High capacity 1-1/2" NPT discharge
• Heavy duty oil filled motor for long life

Cast iron pump housing for long life and quiet operation. Compactly designed for small sump pits. Two pole mechanical float switch provides on-off action for many years of safe, reliable service. Overload protection keeps motor from over-heating. Permanen tly lubricated ball bearing never needs oiling. Unitized shaft seal for long life. Top suction strainer stops foreign particles before they can clog the pump. Thermoplastic top assembly will not rust or corrode. Easy to install. 10" minimum sump diameter; 9" on-level; 3-1/2" off-level. 1-1/4" discharge.

Liberty Pumps 257 1/3-Horse Power 1-1/2-Inch Discharge 250-Series Cast Iron Automatic Submersible Sump/Effluent Pump with VMF Switch

Liberty Pumps 257 1/3-Horse Power 1-1/2-Inch Discharge 250-Series Cast Iron Automatic Submersible Sump/Effluent Pump with VMF Switch Review

Liberty Pumps 257 1/3-Horse Power 1-1/2-Inch Discharge 250-Series Cast Iron Automatic Submersible Sump/Effluent Pump with VMF Switch Feature

• Pumps up to 50 GPM
• Maximum discharge head of 21-Foot
• 1/2-Inch solids handling
• Efficient motor design reduces electrical usage by up to 40-percent
• Includes a magnetically operated VMF switch for smaller pits down to a 10-Inch diameter

With a durable, epoxy powder coat finish and vortex style impeller, Liberty's 250-series pump is the perfect choice for low-head effluent pumping or basement de-watering.

Flotec E75VLT 3/4 HP Sump Pump

Flotec E75VLT 3/4 HP Sump Pump Review

Flotec E75VLT 3/4 HP Sump Pump Feature

• Energy Efficient motor
• Cast Iron
• Vertical float switch
• 116 Volt AC 1 Phase
• Easy to install

Continuous Duty Automatic Submersible Sump Pump Ideal for high volume water removal 3...

Flotec FPSC3250A 1/2 HP Submersible Cast Iron Sump Pump

Flotec FPSC3250A 1/2 HP Submersible Cast Iron Sump Pump Review

Flotec FPSC3250A 1/2 HP Submersible Cast Iron Sump Pump Feature

• Pumps up to 4680-Gallons an hour
• Lifts up to 28-Feet
• 10-Feet grounded power cord
• 1-1/2-Inch discharge
• Can be used in a narrow 10-Inch diameter sump basin

Automatic submersible cast iron sump pump Extremely quite operation Heavy duty cast iron and stainless steel construction with screened inlet Vertical float switch can be used in 10 inch diameter or larger sump basin 5 year warranty Maximum pumping capacity to 4680 gallons per hour 1-1/2 inch discharge pipe size 115 volt overload protected motor

Wicor FPW73-19 18x22 Sump Pump Basin

Wicor FPW73-19 18x22 Sump Pump Basin Review

Wicor FPW73-19 18x22 Sump Pump Basin Feature

• Wicor FPW73-19 18x22 Sump Pump Basin
• PENTAIR WATER

18'W x 22'H, Sump Pump Basin, Works With Lid FPW73-20, Not Included.